Smart integration of microwave motion sensor and multiple current selection LED driver, which gives pre-selected constant current to drive the LED’s to work based upon movement detection. Designed in the software and thanks to our worldwide patented circuit, the built-in daylight sensor is prior to motion sensor so as to achieve utmost energy saving purpose. With the detached sensor antenna SAM5, it requires very little space on the LED panel. Only the antenna is installed on the surface, while the main body can be hidden behind the panel. Completely shadow free.
Use for retrofit and new luminaire design/ installations. Suitable for building inti the fixture for:
| Mains Voltage | 220~240VAC |
| Stand-by power | <0.8V |
| Warming-up | 20s |
| Input Current | 0.17-0.16A |
| Input Power | 35W |
| Empty Load Voltage | 70V |
| Power Factor | >0.9 |
| Efficiency | 85& (Max.) |
| Output current | 350/500/550/700/750/900mA |
| Sensor Priciple | High Frequency (Microwave) |
| Operation frequency | 5.8GHz +/-75MHz |
| Transmission power | <0.2mW |
| Detection Range | Max. (OxH): 12m x 6m |
| Detection Angel | 30 ~ 150 Degrees |
| Settings adjustments | |
| Sensitivity | 10% / 50% 75% / 100% |
| Hold time | 30s ~ 30 min (Selectable) |
| Daylight treeshold | 2 ~ 50 lux, Disable |
| Stand-by period | 0s ~ 1h, +∞ (Selecteble) |
| Stand-by dimminglevel | 5% / 10% 20% / 50% |
| Operation temperature | -35 ~ +70 Degree Celcius |
| IP Rating | IP20 |
| Certification | Semko, CB, EMC, CE, R&TTE, SAA |
