In many cases, several sensors are connected together to control the same fixture, or to trigger on each other, the sudden on/off may cause huge magnetic pulse and mis-trigger the sensor. Hytronik condominium sensor HC019V is specially designed for these applications with 1-10V output which employes a strong software to overcome the megnatic interferences.
In a lot of buildings, there is a need that the moving object in corridor or undercover garage can trigger a transmitter luminarie with connected receiver luminaries from more than one direction. Every transmitter luminaries (containing the sensor) should be able to trigger the whole installation whether it’s an on/off or dimming installation.
See the example below that there are several exits /entrances to the corridor, no matter which sensor at exit /entrance is triggered, the luminaries in the group will light up.
| Mains Voltage | 220~240VAC |
| Stand-by power | <0.8V |
| Warming-up | 20s |
| Load ratings | 800W – Capacitiv Load |
| 2000W – Resisitv Load | |
| Sensor Priciple | High Frequency (Microwave) |
| Operation frequency | 5.8GHz +/-75MHz |
| Transmission power | <0.2mW |
| Detection Range | Max. (OxH): 12m x 6m |
| Detection Angel | 30 ~ 150 Degrees |
| Settings adjustments | |
| Sensitivity | 10% / 50% 75% / 100% |
| Hold time | 5s/30s/1min/5min/10min/20min/30min, can be customized |
| Daylight treeshold | 2~50Lux, disable, can be customize |
| Stand-by period | 0s ~ 1h, +∞ (Selecteble) |
| Stand-by dimminglevel | 5% / 10% / 20% / 50% |
| Operation temperature | -35 ~ +70 Degree Celcius |
| IP Rating | IP20 |
| Certicication | Semko, CB, EMC, CE, R&TTE, SAA |
